How often can tips be re-used with the tips function of epMotion?

The tips can be reused for up to 6 times.

Why should I have my ep Motion serviced at regular intervals?

To ensure the optimum performance and precision of your device. This also enables the early detection of any defects which can then be corrected easily. Only precise and accurate devices ensure successful liquid transfers!

Which consumables should be replaced at regular intervals?

All three XYZ flex cables should be replaced at least once per year if the machine is used daily.

How much are the different ep Motion service programs?

The costs depend on the model and service that is performed. Please contact your local Eppendorf Service.

Does a service carried out by Eppendorf meet the GMP requirement?

Eppendorf offers global certification services which comply with FDA 21 CFR Part 11, EU GMP Annex 11, GLP and GAMP ® 5 to ensure a consistent, standardized operation. We also enable an uncomplicated validation from the implementation to the shutdown by providing support for the installation und operational qualifications (IQ/OQ) of the device and with the software. The entire qualification is documented in detail and the operator’s personnel is qualified and certified in intensive training sessions.

Why do the dispensing tools of my ep Motion need to be calibrated?

The dispensing tools are precision devices. Servicing and calibration at regular intervals ensure a consistently high precision of the results. We provide documentation in support for GLP to assist you.

What is IQ or OQ and what do I need them for?

Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.

How often does my ep Motion need to be serviced?

The need for service depends on how intensively the device is used and if you are working in a regulated field with special service demands. However, we recommend to have it serviced at least once a year.

What do you need to look out for before carrying out a service?

The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device.

How often does the OQ need to be carried out for an ep Motion ?

The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.

Why can the dispending tool be calibrated without the user unit ?

The ep Motion dispensing tool is calibrated with the help of the ep Motion Tool Holder. The electronic parameter to control the tools of the ep Motion are always the same in all ep Motion units. Therefore all ep Motion dispensing tool can be calibrated on different units than the user unit. The only exceptions are the TS10 and TM10 dispensing tool. They can only be calibrated with units controlled by epBlue Version 40.5.

Who is my local service contact?

Please contact your local Eppendorf Service Team. You find the contact data on our homepage ( www.eppendorf.com ) or in the information materials.

What types of training or online training do you offer to enable me to improve my skills?

Please visit the Eppendorf webpage about the Eppendorf Training Center ( https://www.eppendorf.com/training or contact your local Eppendorf Service for further information and a quotation.

What types of service programs are available for ep Motion ?

The available service programs can be found under the respective instrument in the Service & Support / Maintenance and Certification Services section.

How often do dispensing tools need to be calibrated?

As part of his test equipment monitoring process, the operator determines the frequency of the calibration as well as the quantity of the testing volume and the number of measurements for each testing volume. This may vary depending on how often the device is used, by how many operators it is used, the aggressivity of the liquids used and the maximum permissible errors defined by the operator. The dispensing tools of your device will display after 200,000 runs that an inspection is recommended. However, there should be at least 1 calibration per year.

text.skipToContent text.skipToNavigation

IN | INR

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

epMotion^® 5075

epMotion 5075vt liquid handler with accessories

epMotion 5075vt liquid handler with empty deck

Product Information

The epMotion 5075 is the ideal solution for diverse liquid handling demands. It offers the same outstanding accuracy and precision as epMotion 5070 and 5073. The available options make the 5075 an excellent and flexible device for applications such as NGS library preparation, real-time PCR set-up, magnetic bead-based and filter-based purification, cell-based assays or any routine pipetting tasks.

Show more Product Information

epMotion Method Overview

You will find additional download material at the bottom of this page

Product Information

Technical Data

Applications

Features

epMotion 5075 family overview:

epMotion^® 5075l
Don't stress yourself by doing complex pipetting tasks when you can perform fast, accurate and reproducible PCR plate setup with the epMotion 5075l automated liquid handler. The epMotion 5075l offers 15 worktable positions and is well suited for high-throughput preparation of plates, PCR or qPCR setup, DNA/RNA normalization, cherry picking, dilution series, reformatting, and immunoassays. Say goodbye to tedious pipetting steps!

epMotion^® 5075t
The epMotion 5075t automated liquid handling system allows you to perform high-throughput NGS library preparation with magnetic beads with speed and efficiency. It is also ideal for automating more complex, time-consuming liquid handling tasks such as DNA/RNA extraction and ELISA. Save time and improve the reproducibility of your results with the epMotion 5075t!

epMotion^® 5075v
With integrated vacuum filtration, the epMotion 5075v allows true walk-away automation of filter-based purification or extraction protocols. Increase your lab productivity and free up time for other tasks!

epMotion^® 5075vt
With integrated vacuum filtration and a combined mixing and temperature control module in one system, the epMotion 5075vt allows true walk-away automation of both filter- and bead-based, purification or extraction protocols. Do not let complex purifications and extractions tie you to your workbench!

epMotion^® 5075t NGS Solution
The epMotion 5075t NGS Solution includes all dispensing tools, accessories, and consumables needed for NGS library preparation of up to 96 samples. It automates the process, providing reproducible and precise results while increasing lab productivity. With maximum kit flexibility, it's ideal for medium- to high-throughput and complex NGS workflows, eliminating the need for labor-intensive manual workflows.

Specifications	epMotion^® 5075l	epMotion^® 5075t	epMotion^® 5075t NGS Solution	epMotion^® 5075v	epMotion^® 5075vt

Eppendorf ThermoMixer^®
Speed	−	300 – 2,000 rpm	300 – 2,000 rpm	−	300 – 2,000 rpm
Time range setting	−	30 s – 120 min	30 s – 120 min	−	30 s – 120 min
Max. load	−	1,000 g / 2.2 lb	1,000 g / 2.2 lb	−	1,000 g / 2.2 lb
Temperature range	−	15 °C below RT to 95 °C	15 °C below RT to 95 °C	−	15 °C below RT to 95 °C
Heating rate	−	5 °C/min	5 °C/min	−	5 °C/min
Cooling rate above RT	−	3 °C/min	3 °C/min	−	3 °C/min
Cooling rate below RT	−	1 °C/min	1 °C/min	−	1 °C/min

Thermal module
Max. number of modules	3	2	2	3	2
Time range setting	1 – 120 min	1 – 120 min	1 – 120 min	1 – 120 min	1 – 120 min
Temperature range	0 °C – 110 °C	0 °C – 110 °C	0 °C – 110 °C	0 °C – 110 °C	0 °C – 110 °C
Heating rate	9 °C/min	9 °C/min	9 °C/min	9 °C/min	9 °C/min
Cooling rate	4 °C/min	4 °C/min	4 °C/min	4 °C/min	4 °C/min

Vacuum unit
Vacuum max. output	−	−	−	35 NL/min	35 NL/min
Suction range	−	−	−	0.1 – 85 kPa	0.1 – 85 kPa
Suction time	−	−	−	1 sec to 36 min	1 sec to 36 min

Volume range	0.2 µL – 1 mL	0.2 µL – 1 mL	0.2 µL – 1 mL	0.2 µL – 1 mL	0.2 µL – 1 mL
Operating mode	automation	automation	automation	automation	automation
Autoclavable	yes (tools)	yes (tools)	yes (tools)	yes (tools)	yes (tools)
Power supply	100 – 240 V, 50 – 60 Hz	100 – 240 V, 50 – 60 Hz	100 – 240 V, 50 – 60 Hz	100 – 240 V, 50 – 60 Hz	100 – 240 V, 50 – 60 Hz
Consumables	epT.I.P.S. motion tips as racks or reload	epT.I.P.S. motion tips as racks or reload	epT.I.P.S. motion tips as racks or reload	epT.I.P.S. motion tips as racks or reload	epT.I.P.S. motion tips as racks or reload
Max. power consumption	700 W	700 W	700 W	700 W	700 W
Dimensions (W × D × H)	108 × 62 × 81 cm / 43 × 25 × 32 in	108 × 62 × 81 cm / 43 × 25 × 32 in	108 × 62 × 81 cm / 43 × 25 × 32 in	108 × 62 × 81 cm / 43 × 25 × 32 in	108 × 62 × 81 cm / 43 × 25 × 32 in
Product weight	122 kg / 269 lb	124 kg / 273 lb	124 kg / 273 lb	123 kg / 271 lb	128 kg / 282 lb
SLAS/ANSI positions	15	14.5	14.5	12	12

Downloads: epMotion^® 5075

Your session will expire soon

Minutes

Seconds

You are about to leave this site.

epMotion® 5075

epMotion 5075t NGS Solution, equipped

epMotion 5075t, empty

epMotion 5075vt, equipped

epMotion 5075vt, empty

Product Information

Sets & Bundles (5)

epServices (14)

Accessories (97)

Product Information

Technical Data

Applications

Features

Downloads: epMotion® 5075

Brochures(38)

Certificates(6)

Notes & Papers(52)

FAQs(16)

You might also consider

Eppendorf Deepwell Plates

DNA LoBind® Plates

Protein LoBind® Plates

Welcome to Eppendorf India

epMotion^® 5075

Downloads: epMotion^® 5075

DNA LoBind^® Plates

Protein LoBind^® Plates